From new construction cladding to emergency storm repairs, Forge Siding delivers field-tested Siding across Cedar and the surrounding MN service area. Call today for a free on-site estimate.
What separates our Cedar operation from the competition isn't a slogan — it's the fact that every estimate we write is signed by a licensed contractor, every project has a named lead installer accountable for the outcome, and every job site is cleaned before we leave at night.
We work on everything from single-family homes in residential neighborhoods to commercial cladding on multi-family buildings and light industrial structures across MN. If it involves protecting a building's exterior envelope, we have the tools, the certifications, and the track record to handle it properly.
Licensed, bonded, and carrying full general liability plus workers' compensation in MN — not because it's optional, but because those protections matter for homeowners who invite a crew onto their property. Ask for our certificate of insurance before signing anything; we provide it without hesitation.
Most siding problems start small and quiet — a missed fastener, a failed caulk joint, a crack that looks cosmetic. By the time interior moisture damage appears, the repair scope has usually doubled. Watch for these early signals.
Cracked panels aren't just cosmetic — they're open invitations for moisture infiltration. Any crack that reaches through the panel face needs attention.
Musty smell in exterior-adjacent rooms, soft drywall near windows, or paint bubbling on interior walls all point to moisture infiltration from outside. Don't wait.
Warped vinyl often means panels were installed too tight — no expansion room for thermal movement. Over time, buckling creates gap points where panels separate at the lock, letting wind and water in.
Exterior paint peeling within two to three years of a repaint is almost always a substrate or back-priming issue. We diagnose the cause before recommending a fix.
Fastener issues are quiet until they're catastrophic. A section that blows off in a windstorm — and the water damage that follows — costs far more to fix than a fastener re-drive.
Air leakage through a compromised siding system can account for 10–20% of HVAC load. Addressing the envelope often produces measurable utility savings alongside the repair value.
Our Cedar, MN team handles the full range of residential and commercial cladding work, from single-panel repairs to complete building envelope re-siding.
New siding installation covers everything from the housewrap to the trim: starter strip, flashing at all penetrations, panel installation per manufacturer spec, and finishing trim at corners, windows, and the roofline. We work on new construction alongside GCs and handle full tear-off replacements on existing homes. Our Cedar, MN crews are certified on vinyl, fiber cement, engineered wood, and steel panel systems — and we carry each product's installation manual on every job.
For insurance-related repairs, we produce a detailed damage documentation package — panel-level photos, square footage by elevation, material specifications — formatted for adjuster review. We've worked with every major carrier operating in MN and understand what documentation a claim requires.
Each cladding material has its own installation requirements, failure modes, and maintenance profile — and a crew that treats them all identically is a crew that will make material-specific mistakes. Our Cedar, MN specialists understand fiber cement's silica cutting protocols and back-priming requirements, vinyl's thermal expansion characteristics and lock-engagement tolerances, and wood's moisture content sensitivity and end-grain sealing needs. We don't sell you a product and then install it generically.
Property managers and HOA boards working with us get a dedicated project point of contact, building-by-building scheduling, and standardized documentation — including permit records, warranty registrations, and post-project photo files — formatted for HOA board records and reserve fund reporting.
On replacement projects, we replace trim components that are damaged or compromised regardless of the primary panel material — because leaving old, failing trim behind a new siding installation creates the exact problem the new siding was supposed to solve.
Post-storm inspections document hail and wind damage at panel face level — the kind of close-range documentation that insurance adjusters need for a full-scope claim approval. We've helped Cedar, MN homeowners recover adjuster-approved claim settlements that significantly exceeded initial offers, simply by providing specific panel-level evidence instead of general descriptions.
These aren't marketing claims. They're the operational commitments our Cedar, MN clients reference when they recommend us to their neighbors.
Every estimate we write lists materials, labor, and any permit fees as separate line items. You know what you're paying for before signing anything — no lump-sum guesses that hide markup.
We don't schedule jobs we can't start within a reasonable window. If our current backlog means a delay, we tell you upfront and give you realistic dates — not optimistic ones.
Our MN contractor license number is provided at first contact. Look it up in the state database before signing anything — we encourage it. We carry current general liability and workers' compensation; certificates are available on request.
A warranty that isn't in writing isn't a warranty. Ours is a document you can file, reference, and enforce.
A crew that leaves a clean site every evening is a crew that respects the property they're working on. Our standard includes daily cleanup as a non-negotiable part of the project schedule.
Documentation that exists only in our files doesn't help you. We hand over a complete close-out package at final walkthrough, organized and ready for your records.
No mysteries, no moving goalposts. The same documented process runs on every project we take in MN.
Your first call goes to a real dispatcher who asks the right questions. We arrive at the site assessment with the tools to measure, probe for moisture, and give you an accurate picture of what the project actually involves.
The estimate is a document, not a handshake. It lists every component — panels, trim, housewrap, fasteners, labor, permit fees — so you know exactly what's included before signing.
Where permits are required in MN, we handle the application, filing fee, and inspection scheduling. Your confirmed start date is put in writing and we communicate proactively if anything changes — you don't have to follow up with us.
Surprises are handled on your schedule, not ours. We document unexpected findings with photos, give you the repair cost in writing, and proceed only with your explicit sign-off.
At project completion, we walk every elevation with you, confirm every scope item is complete, and hand over the close-out package: permit records, manufacturer warranty registrations, post-project photos, and our written workmanship warranty. Final payment is collected after the walkthrough sign-off — not before.
If our workmanship doesn't meet the standard we committed to in writing, we come back and make it right at no additional charge. That's not a marketing statement — it's the language in our warranty document, signed at project close. Our Cedar, MN clients get a document they can actually reference, not a slogan.
Talk to a Cedar, MN Specialist NowWe replaced siding on the whole house after hail damage. Forge Siding handled the insurance documentation — panel-by-panel photos, written damage report, the whole package. The adjuster approved full replacement scope on first review. Crew finished in six days, clean site every night, and the new fiber cement looks exactly like what we picked from the sample.
The estimate they provided was the most detailed written document I've received from any contractor in 20 years of homeownership. Line items for every material component, labor broken down by scope, permit fee listed separately. No surprises when the final invoice came.
I manage a 34-unit HOA community in Cedar, MN. Coordinating siding work across occupied buildings requires planning most contractors don't have. Forge Siding did building-by-building scheduling, communicated directly with residents about staging dates, and completed the project three days ahead of the contracted timeline. Comprehensive documentation delivered before final payment was due.
Fiber cement installation — the back-priming, the fastener schedule documentation, the warranty registration process — was handled exactly as the manufacturer requires. Our close-out package has the Preferred Contractor registration and the complete fastener log. The 30-year warranty is in force.
The crew found rotted sheathing on the west wall during tear-off. Called me immediately, showed me exactly what they found with photos, and gave me the change order before touching anything. The whole process was transparent from start to finish — that's exactly how contractors should handle unexpected conditions.
I verified their license number in the state database before signing. Current, no disciplinary history. That two-minute check told me this was a contractor operating transparently. Everything about the project execution matched that first impression.
Our Cedar-based team handles every project in the service area — meaning the same crew that handles a large commercial contract is available for residential repairs in surrounding communities. Proximity matters for response time, familiarity with local inspectors, and the practical ability to return quickly if any post-project follow-up is needed.
Serving zip codes: 55011
Reach our Cedar dispatch line for fast scheduling, honest pricing, and a crew that actually shows up when they say they will.
📞 Call Now: +1-844-782-0929